| Common Name: | DEVCON FLEXANE 80 LIQUID, FLEXA NE 80 LIQUID CURING AGENT |
| Manufacturer: | ITW POLYMERS ADHESIVES, NORTH AMERICA |
| SDS Revision Date: | 10/20/2015 |
| SDS Format: | GHS-US |
| Item Number(s): | 65KU69 |
| Manufacturer Model Number(s): |
SDS Table of Contents
Click the desired link below to jump directly to that section in the SDS.
DEVCON(R*)
KIT - SAFETY DATA SHEET
PRODUCT IDENTIFIER USED ON THE LABEL:
KIT NAME: DEVCON(R*) FLEXANE(R*) 80 LIQUID
STOCK NO.: 15800
OTHER MEANS OF IDENTIFICATION:
RECOMMENDED USE OF THE CHEMICAL AND RESTRICTIONS ON USE:
CHEMICAL MANUFACTURER ADDRESS AND TELEPHONE NUMBER:
MANUFACTURER NAME: ITW POLYMERS ADHESIVES, NORTH AMERICA
ADDRESS:
30 ENDICOTT STREET
DANVERS, MA 01923
COMPONENT LIST:
COMPONENT B: FLEXANE 80 LIQUID CURING AGENT
COMPONENT A: FLEXANE 80 LIQUID RESIN
KIT SDS REVISION DATE: 10/20/2015
COMPONENT A - SDS
| SECTION 1: IDENTIFICATION |  |
PRODUCT IDENTIFIER USED ON THE LABEL:
PRODUCT NAME: FLEXANE 80 LIQUID RESIN
OTHER MEANS OF IDENTIFICATION:
RECOMMENDED USE OF THE CHEMICAL AND RESTRICTIONS ON USE:
CHEMICAL MANUFACTURER ADDRESS AND TELEPHONE NUMBER:
MANUFACTURER NAME: ITW
ADDRESS:
30 ENDICOTT STREET
DANVERS, MA 01923
GENERAL PHONE NUMBER: (978) 777-1100
EMERGENCY PHONE NUMBER:
EMERGENCY PHONE NUMBER: (800) 424-9300
CHEMTREC:
FOR EMERGENCIES IN THE US, CALL CHEMTREC: 800-424-9300
| SECTION 2: HAZARD(S) IDENTIFICATION | |
CLASSIFICATION OF THE CHEMICAL IN ACCORDANCE WITH CFR 1910.1200(D)(F):
GHS PICTOGRAMS:
SKULLS AND CROSSBONES
HEALTH HAZARD
EXCLAMATION MARK
SIGNAL WORD: DANGER.
GHS CLASS:
ACUTE INHALATION TOXICITY. CATEGORY 3.
RESPIRATORY SENSITISATION. CATEGORY 1.
SPECIFIC TARGET ORGAN TOXICITY - STOT REPEATED EXPOSURE RE. CATEGORY 2
(INHALATION, RESPIRATORY SYSTEM).
EYE IRRITATION. CATEGORY 2.
SKIN IRRITATION. CATEGORY 2.
SKIN SENSITIZATION. CATEGORY 1.
SPECIFIC TARGET ORGAN TOXICITY - STOT, SINGLE EXPOSURE SE. CATEGORY 3.
HAZARD STATEMENTS:
H331: TOXIC IF INHALED.
H334:
MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
H319: CAUSES SERIOUS EYE IRRITATION.
H315: CAUSES SKIN IRRITATION.
H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
H335: MAY CAUSE RESPIRATORY IRRITATION.
PRECAUTIONARY STATEMENTS:
P260: DO NOT BREATHE DUST/FUME/GAS/MIST/VAPOURS/SPRAY.
P261: AVOID BREATHING DUST/FUME/GAS/MIST/VAPOURS/SPRAY.
P264: WASH HANDS THOROUGHLY AFTER HANDLING.
P271: USE ONLY OUTDOORS OR IN A WELL-VENTILATED AREA.
P272:
CONTAMINATED WORK CLOTHING SHOULD NOT BE ALLOWED OUT OF THE WORKPLACE.
P280:
WEAR PROTECTIVE GLOVES/PROTECTIVE CLOTHING/EYE PROTECTION/FACE PROTECTION.
P284: IN CASE OF INADEQUATE VENTILATION WEAR RESPIRATORY PROTECTION.
P302+P352:
IF ON SKIN: WASH WITH PLENTY OF WATER.
P304+P340:
IF INHALED:
REMOVE VICTIM TO FRESH AIR AND KEEP AT REST IN A POSITION COMFORTABLE FOR
BREATHING.
P305+P351 + P338:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES,
IF PRESENT AND EASY TO DO. CONTINUE RINSING.
P311: CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
P312: CALL A POISON CENTER OR DOCTOR/PHYSICIAN IF YOU FEEL UNWELL.
P314: GET MEDICAL ADVICE/ATTENTION IF YOU FEEL UNWELL.
P321: SPECIFIC TREATMENT (SEE... ON THIS LABEL).
P332+P313:
IF SKIN IRRITATION OCCURS: GET MEDICAL ADVICE/ATTENTION.
P333+P313:
IF SKIN IRRITATION OR RASH OCCURS: GET MEDICAL ADVICE/ATTENTION.
P337+P313:
IF EYE IRRITATION PERSISTS: GET MEDICAL ADVICE/ATTENTION.
P342+P311:
IF EXPERIENCING RESPIRATORY SYMPTOMS:
CALL A POISON CENTER OR DOCTOR/PHYSICIAN.
P362+P364: TAKE OFF CONTAMINATED CLOTHING AND WASH IT BEFORE REUSE.
P403+P233: STORE IN A WELL-VENTILATED PLACE. KEEP CONTAINER TIGHTLY CLOSED.
P405: STORE LOCKED UP.
P501:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH LOCAL, STATE, FEDERAL AND
PROVINCIAL REGULATIONS.
HAZARDS NOT OTHERWISE CLASSIFIED THAT HAVE BEEN IDENTIFIED DURING THE
CLASSIFICATION PROCESS:
ROUTE OF EXPOSURE: EYES. SKIN. INHALATION. INGESTION.
POTENTIAL HEALTH EFFECTS:
EYE:
CAN CAUSE MODERATE IRRITATION, BURNING SENSATION, TEARING, REDNESS, AND
SWELLING. OVEREXPOSURE MAY CAUSE LACRIMATION, CONJUNCTIVITIS, CORNEAL
DAMAGE AND PERMANENT INJURY.
SKIN:
CAN CAUSE SKIN IRRITATION; ITCHING, REDNESS, RASHES, HIVES, BURNING, AND
SWELLING. ALLERGIC REACTIONS ARE POSSIBLE.
MAY CAUSE SKIN SENSITIZATION, AN ALLERGIC REACTION, WHICH BECOMES EVIDENT
ON REEXPOSURE TO THIS MATERIAL.
INHALATION:
RESPIRATORY TRACT IRRITANT. HIGH CONCENTRATION MAY CAUSE DIZZINESS,
HEADACHE, AND ANESTHETIC EFFECTS.
MAY CAUSE RESPIRATORY SENSITIZATION WITH ASTHMA-LIKE SYMPTOMS IN
SUSCEPTIBLE INDIVIDUALS.
INGESTION:
CAUSES IRRITATION, A BURNING SENSATION OF THE MOUTH, THROAT AND
GASTROINTESTINAL TRACT AND ABDOMINAL PAIN.
CHRONIC HEALTH EFFECTS:
PROLONGED SKIN CONTACT MAY LEAD TO BURNING ASSOCIATED WITH SEVERE
REDDENING, SWELLING, AND POSSIBLE TISSUE DESTRUCTION.
SIGNS/SYMPTOMS:
OVEREXPOSURE CAN CAUSE HEADACHES, DIZZINESS, NAUSEA, AND VOMITING.
TARGET ORGANS: EYES. SKIN. RESPIRATORY SYSTEM. DIGESTIVE SYSTEM.
AGGRAVATION OF PRE-EXISTING CONDITIONS:
INDIVIDUALS WITH PRE-EXISTING SKIN DISORDERS, ASTHMA, ALLERGIES OR KNOWN
SENSITIZATION MAY BE MORE SUSCEPTIBLE TO THE EFFECTS OF THIS PRODUCT.
ISOCYANATE EXPOSURE LEVELS MUST BE MONITORED. MEDICAL SUPERVISION OF ALL
EMPLOYEES WHO HANDLE OR COME IN CONTACT WITH ISOCYANATES IS RECOMMENDED
(I.E. FEV, FVC). THIS SHOULD INCLUDE PRE-EMPLOYMENT AND PERIODIC MEDICAL
EXAMINATIONS.
PERSONS WITH ASTHMATIC-TYPE CONDITIONS, CHRONIC BRONCHITIS, OTHER CHRONIC
RESPIRATORY DISEASES, RECURRENT SKIN ECZEMA OR SENSITIZATION SHOULD BE
EXCLUDED FROM WORKING WITH THIS PRODUCT. ONCE SENSITIZED NO FURTHER
EXPOSURE CAN BE PERMITTED.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
MIXTURES:
CHEMICAL NAME CAS# INGREDIENT PERCENT EC NUM.
RELATED PREPOLYMERS OF PICM 68310-52-1 80 - 90 BY WEIGHT
DICYCLOHEXYLMETHANE-4,4'- 5124-30-1 10 - 20 BY WEIGHT
DIISOCYANATE
| SECTION 4: FIRST AID MEASURES | |
DESCRIPTION OF NECESSARY MEASURES:
EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 TO 20 MINUTES.
ENSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE EYELIDS WITH
FINGERS. GET IMMEDIATE MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH SKIN WITH PLENTY OF SOAP AND WATER FOR 15 TO 20 MINUTES,
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. GET MEDICAL ATTENTION IF
IRRITATION DEVELOPS OR PERSISTS.
INHALATION:
IF INHALED, REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION OR GIVE OXYGEN BY TRAINED PERSONNEL. SEEK IMMEDIATE MEDICAL
ATTENTION.
INGESTION:
IF SWALLOWED, DO NOT INDUCE VOMITING. CALL A PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
INDICATION OF IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED:
NOTE TO PHYSICIANS:
ASTHMATIC TYPE SYMPTOMS MAY DEVELOP, WHICH MAY BE IMMEDIATE OR DELAYED FOR
SEVERAL HOURS.
| SECTION 5: FIRE FIGHTING MEASURES | |
SUITABLE AND UNSUITABLE EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
USE CARBON DIOXIDE (CO2) OR DRY CHEMICAL WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
UNSUITABLE EXTINGUISHING MEDIA: WATER MAY CAUSE FROTHING.
UNUSUAL FIRE HAZARDS:
DO NOT RESEAL CONTAINERS IF CONTAMINATED WITH WATER, RESIN WILL REACT WITH
WATER TO RELEASE CARBON DIOXIDE.
AS A RESULT OF THE WATER CONTAMINATION, PRESSURE WILL BUILD UP IN THE
SEALED CONTAINER CAUSING IT TO RUPTURE.
SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS:
PROTECTIVE EQUIPMENT:
AS IN ANY FIRE, WEAR SELF-CONTAINED BREATHING APPARATUS (SCBA), MSHA/NIOSH
(APPROVED OR EQUIVALENT) AND FULL PROTECTIVE GEAR.
FIRE FIGHTING INSTRUCTIONS:
EVACUATE AREA OF UNPROTECTED PERSONNEL. USE COLD WATER SPRAY TO COOL FIRE
EXPOSED CONTAINERS TO MINIMIZE RISK OF RUPTURE. DO NOT ENTER CONFINED FIRE
SPACE WITHOUT FULL PROTECTIVE GEAR. IF POSSIBLE, CONTAIN FIRE RUN-OFF
WATER.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
PERSONAL PRECAUTIONS:
EVACUATE AREA AND KEEP UNNECESSARY AND UNPROTECTED PERSONNEL FROM ENTERING
THE SPILL AREA.
ENVIRONMENTAL PRECAUTIONS:
ENVIRONMENTAL PRECAUTIONS:
AVOID RUNOFF INTO STORM SEWERS, DITCHES, AND WATERWAYS.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP:
SPILL CLEANUP MEASURES:
ABSORB SPILL WITH INERT MATERIAL (E,G., DRY SAND OR EARTH), THEN PLACE IN A
CHEMICAL WASTE CONTAINER. PROVIDE VENTILATION. CLEAN UP SPILLS IMMEDIATELY
OBSERVING PRECAUTIONS IN THE PROTECTIVE EQUIPMENT SECTION. NEUTRALIZE
RESIDUE WITH APPROPRIATE NEUTRALIZER. DO NOT ATTEMPT TO NEUTRALIZE LARGE
QUANTITIES OF MATERIAL UNLESS MEASURES TO CONTROL REACTIVITY AND HEAT
GENERATION HAVE BEEN TAKEN. AFTER REMOVAL, FLUSH SPILL AREA WITH SOAP AND
WATER TO REMOVE TRACE RESIDUE.
AVOID PERSONAL CONTACT AND BREATHING VAPORS OR MISTS. VENTILATE AREA. USE
PROPER PERSONAL PROTECTIVE EQUIPMENT AS LISTED IN SECTION 8.
A BLANKET OF PROTEIN FOAM MAY BE PLACED OVER SPILL FOR TEMPORARY CONTROL OF
ISOCYANATE
VAPOR.
REFERENCE TO OTHER SECTIONS:
OTHER PRECAUTIONS:
PUMP LARGE QUANTITIES INTO CLOSED BUT NOT SEALED METAL CONTAINERS.
ISOCYANATES WILL REACT WITH WATER AND GENERATE CARBON DIOXIDE, THIS COULD
RESULT IN THE RUPTURE OF ANY CLOSED CONTAINERS.
NEUTRALIZE USING 10 PARTS NEUTRALIZER TO 1 PART ISOCYANATE SOLUTION. MIX
AND ALLOW TO STAND FOR 48 HRS IN CONTAINERS, LETTING EVOLVED CARBON DIOXIDE
TO VENT. NEUTRALIZER CONSIST OF 90% WATER, 3-8% CONCENTRATED AMMONIA (OR
SODIUM CARBONATE), 2% DETERGENT.
| SECTION 7: HANDLING AND STORAGE | |
PRECAUTIONS FOR SAFE HANDLING:
HANDLING:
USE WITH ADEQUATE VENTILATION. AVOID BREATHING VAPOR, AEROSOL OR MIST.
HYGIENE PRACTICES: WASH THOROUGHLY AFTER HANDLING.
SPECIAL HANDLING PROCEDURES:
PROVIDE APPROPRIATE VENTILATION/RESPIRATORY PROTECTION AGAINST
DECOMPOSITION PRODUCTS (SEE SECTION 10) DURING WELDING/FLAME CUTTING
OPERATIONS AND TO PROTECT AGAINST DUST DURING SANDING/GRINDING OF CURED
PRODUCT.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
STORAGE:
STORE IN A COOL, DRY, WELL VENTILATED AREA AWAY FROM SOURCES OF HEAT AND
INCOMPATIBLE MATERIALS. KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE. DO
NOT RESEAL CONTAINER IF MOISTURE OR WATER CONTAMINATION IS SUSPECTED. WATER
CONTAMINATED MATERIAL IN A SEALED CONTAINER MAY RUPTURE DUE TO PRESSURE
BUILDUP.
| SECTION 8: EXPOSURE CONTROLS, PERSONAL PROTECTION | |
EXPOSURE GUIDELINES:
DICYCLOHEXYLMETHANE-4,4'-DIISOCYANATE:
GUIDELINE ACGIH:
TLV-TWA: 0.005 PPM
APPROPRIATE ENGINEERING CONTROLS:
ENGINEERING CONTROLS:
USE APPROPRIATE ENGINEERING CONTROL SUCH AS PROCESS ENCLOSURES, LOCAL
EXHAUST VENTILATION, OR OTHER ENGINEERING CONTROLS TO CONTROL AIRBORNE
LEVELS BELOW RECOMMENDED EXPOSURE LIMITS. GOOD GENERAL VENTILATION SHOULD
BE SUFFICIENT TO CONTROL AIRBORNE LEVELS. WHERE SUCH SYSTEMS ARE NOT
EFFECTIVE WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT, WHICH PERFORMS
SATISFACTORILY AND MEETS OSHA OR OTHER RECOGNIZED STANDARDS. CONSULT WITH
LOCAL PROCEDURES FOR SELECTION, TRAINING, INSPECTION AND MAINTENANCE OF THE
PERSONAL PROTECTIVE EQUIPMENT.
INDIVIDUAL PROTECTION MEASURES:
EYE/FACE PROTECTION:
WEAR APPROPRIATE PROTECTIVE GLASSES OR SPLASH GOGGLES AS DESCRIBED BY 29
CFR 1910.133, OSHA EYE AND FACE PROTECTION REGULATION, OR THE EUROPEAN
STANDARD EN 166.
SKIN PROTECTION DESCRIPTION:
WEAR APPROPRIATE PROTECTIVE GLOVES AND OTHER PROTECTIVE APPAREL TO PREVENT
SKIN CONTACT. CONSULT MANUFACTURER'S DATA FOR PERMEABILITY DATA.
RESPIRATORY PROTECTION:
A NIOSH APPROVED AIR-PURIFYING RESPIRATOR WITH AN ORGANIC VAPOR CARTRIDGE
OR CANISTER MAY BE PERMISSIBLE UNDER CERTAIN CIRCUMSTANCES WHERE AIRBORNE
CONCENTRATIONS ARE EXPECTED TO EXCEED EXPOSURE LIMITS. PROTECTION PROVIDED
BY AIR PURIFYING RESPIRATORS IS LIMITED. USE A POSITIVE PRESSURE AIR
SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR AN UNCONTROLLED RELEASE,
EXPOSURE LEVELS ARE NOT KNOWN, OR ANY OTHER CIRCUMSTANCES WHERE AIR
PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE PROTECTION.
OTHER PROTECTIVE:
FACILITIES STORING OR UTILIZING THIS MATERIAL SHOULD BE EQUIPPED WITH AN
EYEWASH AND A DELUGE SHOWER SAFETY STATION.
NOTES: ONLY ESTABLISHED PEL AND TLV VALUES FOR THE INGREDIENTS ARE LISTED.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL AND CHEMICAL PROPERTIES:
PHYSICAL STATE APPEARANCE: LIQUID.
COLOR: CLEAR
ODOR: FAINT.
BOILING POINT: >300 DEG. F (148.8 DEG. C)
MELTING POINT: NOT DETERMINED.
SPECIFIC GRAVITY: 1.04
SOLUBILITY: NEGLIGIBLE.
VAPOR DENSITY: NOT DETERMINED.
VAPOR PRESSURE: <.001 MMHg @ 70 DEG. F
PERCENT VOLATILE: 0
EVAPORATION RATE: NOT DETERMINED.
PH: 7.0 @ 5 PERCENT SOLUTION
MOLECULAR FORMULA: MIXTURE
MOLECULAR WEIGHT: MIXTURE
FLASH POINT: >400 DEG. F (204.4 DEG. C)
FLASH POINT METHOD: TAG CLOSED CUP. (TCC)
LOWER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
UPPER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
VOC CONTENT: 0 G/L
9.2. OTHER INFORMATION:
PERCENT SOLIDS BY WEIGHT: 100
| SECTION 10: STABILITY AND REACTIVITY | |
CHEMICAL STABILITY:
CHEMICAL STABILITY: STABLE UNDER NORMAL TEMPERATURES AND PRESSURES.
POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION:
POLYMERIZATION MAY OCCUR UNDER CERTAIN CONDITIONS.
CONDITIONS TO AVOID:
CONDITIONS TO AVOID:
EXTREME HEAT, SPARKS, AND OPEN FLAME. INCOMPATIBLE MATERIALS, OXIDIZERS AND
OXIDIZING CONDITIONS.
MOISTURE AND EXTENDED EXPOSURE OVER 85 F.
INCOMPATIBLE MATERIALS:
INCOMPATIBLE MATERIALS:
ALCOHOLS, AMINES, STRONG BASES (ALKALI, AMMONIA), ACIDS, METAL COMPOUNDS,
MOISTURE OR WATER. RESIN REACTS WITH WATER TO GIVE OFF CARBON DIOXIDE.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
TOXICOLOGICAL INFORMATION:
DICYCLOHEXYLMETHANE-4,4'-DIISOCYANATE:
EYE:
ADMINISTRATION INTO THE EYE - RABBIT STANDARD DRAIZE TEST: 100 UL [MILD]
ADMINISTRATION INTO THE EYE - RABBIT STANDARD DRAIZE TEST:
100 UL/24H [SEVERE] (RTECS)
INGESTION:
ORAL - RAT LD50 - LETHAL DOSE, 50 PERCENT KILL:
9900 MG/KG [BEHAVIORAL - FOOD INTAKE (ANIMAL) GASTROINTESTINAL -
HYPERMOTILITY, DIARRHEA LIVER - OTHER CHANGES] (RTECS)
| SECTION 12: ECOLOGICAL INFORMATION | |
ECOTOXICITY:
ECOTOXICITY: NO ECOTOXICITY DATA WAS FOUND FOR THE PRODUCT.
ENVIRONMENTAL FATE: NO ENVIRONMENTAL INFORMATION FOUND FOR THIS PRODUCT.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
DESCRIPTION OF WASTE:
WASTE DISPOSAL:
CONSULT WITH THE US EPA GUIDELINES LISTED IN 40 CFR PART 261.3 FOR THE
CLASSIFICATIONS OF HAZARDOUS WASTE PRIOR TO DISPOSAL. FURTHERMORE, CONSULT
WITH YOUR STATE AND LOCAL WASTE REQUIREMENTS OR GUIDELINES, IF APPLICABLE,
TO ENSURE COMPLIANCE. ARRANGE DISPOSAL IN ACCORDANCE TO THE EPA AND/OR
STATE AND LOCAL GUIDELINES.
RCRA NUMBER: NONE.
| SECTION 14: TRANSPORT INFORMATION | |
DOT SHIPPING NAME: REFER TO BILL OF LADING
DOT UN NUMBER: REFER TO BILL OF LADING
IATA SHIPPING NAME: REFER TO BILL OF LADING
IATA UN NUMBER: REFER TO BILL OF LADING
IMDG UN NUMBER: REFER TO BILL OF LADING
IMDG SHIPPING NAME: REFER TO BILL OF LADING
| SECTION 15: REGULATORY INFORMATION | |
SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS SPECIFIC FOR THE PRODUCT:
DICYCLOHEXYLMETHANE-4,4'-DIISOCYANATE:
TSCA INVENTORY STATUS: LISTED
SECTION 313:
EPCRA - 40 CFR PART 372 - (SARA TITLE III) SECTION 313 LISTED CHEMICAL.
CANADA DSL: LISTED
CANADIAN REGULATIONS:
WHMIS HAZARD CLASS(ES): D2A; D2B
WHMIS PICTOGRAMS: D2 - MATERIALS CAUSING OTHER TOXIC EFFECTS
| SECTION 16: ADDITIONAL INFORMATION | |
HMIS RATINGS:
HMIS HEALTH HAZARD 3*
HMIS FIRE HAZARD 1
HMIS REACTIVITY 1
HMIS PERSONAL PROTECTION X
HEALTH HAZARD 3*
FIRE HAZARD 1
REACTIVITY 1
PERSONAL PROTECTION X
* CHRONIC HEALTH EFFECTS
SDS REVISION DATE: JULY 25, 2015
SDS REVISION NOTES: GHS UPDATE
SDS FORMAT: IN ACCORDANCE TO OSHA GHS 1910.1200
SDS AUTHOR: ACTIO CORPORATION
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. ITW POLYMERS ADHESIVES, NA, MAKES NO WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER
THE ITW POLYMERS ADHESIVES, NA PRODUCT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION. GIVEN THE VARIETY OF
FACTORS THAT CAN AFFECT THE USE AND APPLICATION OF A ITW POLYMERS
ADHESIVES, NA PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE ITW
POLYMERS ADHESIVES, NA PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A
PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
ITW POLYMERS ADHESIVES, NA PROVIDES INFORMATION IN ELECTRONIC FORM AS A
SERVICE TO ITS CUSTOMERS. DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC
TRANSFER MAY HAVE RESULTED IN ERRORS, OMISSIONS OR ALTERATIONS IN THIS
INFORMATION, ITW POLYMERS ADHESIVES, NA MAKES NO REPRESENTATIONS AS TO ITS
COMPLETENESS OR ACCURACY. IN ADDITION, INFORMATION OBTAINED FROM A DATABASE
MAY NOT BE AS CURRENT AS THE INFORMATION IN THE MSDS AVAILABLE DIRECTLY
FROM ITW POLYMERS ADHESIVES, NA
COPYRIGHT(C) 1996-2015 ACTIO CORPORATION. ALL RIGHTS RESERVED.
COMPONENT B - SDS
| SECTION 1: IDENTIFICATION | |
PRODUCT IDENTIFIER USED ON THE LABEL:
PRODUCT NAME: FLEXANE 80 LIQUID CURING AGENT
OTHER MEANS OF IDENTIFICATION:
RECOMMENDED USE OF THE CHEMICAL AND RESTRICTIONS ON USE:
CHEMICAL MANUFACTURER ADDRESS AND TELEPHONE NUMBER:
MANUFACTURER NAME: ITW
ADDRESS:
30 ENDICOTT STREET
DANVERS, MA 01923
GENERAL PHONE NUMBER: (978) 777-1100
EMERGENCY PHONE NUMBER:
EMERGENCY PHONE NUMBER: (800) 424-9300
CHEMTREC:
FOR EMERGENCIES IN THE US, CALL CHEMTREC: 800-424-9300
| SECTION 2: HAZARD(S) IDENTIFICATION | |
CLASSIFICATION OF THE CHEMICAL IN ACCORDANCE WITH CFR 1910.1200(D)(F):
GHS PICTOGRAMS:
HEALTH HAZARD
EXCLAMATION MARK
SIGNAL WORD: WARNING.
GHS CLASS:
SPECIFIC TARGET ORGAN TOXICITY -STOT REPEATED EXPOSURE RE. CATEGORY 2
(ORAL, LIVER, KIDNEY, AND PANCREAS).
EYE IRRITATION. CATEGORY 2.
HAZARD STATEMENTS:
H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
H319: CAUSES SERIOUS EYE IRRITATION.
PRECAUTIONARY STATEMENTS:
P260: DO NOT BREATHE DUST/FUME/GAS/MIST/VAPOURS/SPRAY.
P264: WASH HANDS THOROUGHLY AFTER HANDLING.
P280:
WEAR PROTECTIVE GLOVES/PROTECTIVE CLOTHING/EYE PROTECTION/FACE PROTECTION.
P305+P351+P338:
IF IN EYES:
RINSE CAUTIOUSLY WITH WATER FOR SEVERAL MINUTES. REMOVE CONTACT LENSES, IF
PRESENT AND EASY TO DO. CONTINUE RINSING.
P314: GET MEDICAL ADVICE/ATTENTION IF YOU FEEL UNWELL.
P337+P313:
IF EYE IRRITATION PERSISTS: GET MEDICAL ADVICE/ATTENTION.
P501:
DISPOSE OF CONTENTS/CONTAINER IN ACCORDANCE WITH LOCAL, STATE, FEDERAL AND
PROVINCIAL REGULATIONS.
HAZARDS NOT OTHERWISE CLASSIFIED THAT HAVE BEEN IDENTIFIED DURING THE
CLASSIFICATION PROCESS:
ROUTE OF EXPOSURE: EYES. SKIN. INHALATION. INGESTION.
POTENTIAL HEALTH EFFECTS:
EYE:
CAN CAUSE SEVERE EYE IRRITATION AND BURNS. EYE CONTACT MAY CAUSE PERMANENT
DAMAGE OR BLINDNESS.
SKIN: CAUSES SEVERE SKIN IRRITATION. MAY CAUSE PERMANENT SKIN DAMAGE.
INHALATION:
VAPOR OR MIST MAY CAUSE SEVERE RESPIRATORY SYSTEM IRRITATION. INHALATION,
SKIN ABSORPTION, OR INGESTION MAY CAUSE METHEMOGLOBIN FORMATION RESULTING
IN A REDUCED ABILITY OF THE BLOOD TO CARRY OXYGEN; A SYMPTOM OF THIS MAY
BE CYANOSIS (PURPLISH-BLUE COLORING OF SKIN, FINGERNAILS, AND LIPS).
INGESTION:
CAUSES IRRITATION, A BURNING SENSATION OF THE MOUTH, THROAT AND
GASTROINTESTINAL TRACT AND ABDOMINAL PAIN.
CHRONIC HEALTH EFFECTS:
PROLONGED SKIN CONTACT MAY LEAD TO BURNING ASSOCIATED WITH SEVERE
REDDENING, SWELLING, AND POSSIBLE TISSUE DESTRUCTION.
SIGNS/SYMPTOMS:
OVEREXPOSURE MAY CAUSE EYE WATERING OR DISCOMFORT, REDNESS AND SWELLING.
TARGET ORGANS: EYES. SKIN. RESPIRATORY SYSTEM. DIGESTIVE SYSTEM.
AGGRAVATION OF PRE-EXISTING CONDITIONS:
MAY AGGRAVATE PRE-EXISTING RESPIRATORY DISORDERS, ALLERGY, ECZEMA, OR SKIN
CONDITIONS.
| SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS | |
MIXTURES:
CHEMICAL NAME CAS# INGREDIENT PERCENT EC NUM.
DIPROPYLENE GLYCOL DIBENZOATE 27138-31-4 50 - 60 BY WEIGHT
DIETHYLTOLUENEDIAMINE 68479-98-1 30 - 40 BY WEIGHT
DIPROPYLENE GLYCOL MONOBENZOATE 32686-95-6 1 - 10 BY WEIGHT
EPOXIDIZED SOYBEAN OIL 8013-07-8 1 - 10 BY WEIGHT
PROPENYL PROPYL BENZOATE 197178-94-2 1 - 10 BY WEIGHT
PROPYLENE GLYCOL DIBENZOATE 19224-26-1 1 - 10 BY WEIGHT
CARBON BLACK 1333-86-4 0.1 - 1.0 BY WEIGHT
| SECTION 4: FIRST AID MEASURES | |
DESCRIPTION OF NECESSARY MEASURES:
EYE CONTACT:
IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 TO 20 MINUTES.
ENSURE ADEQUATE FLUSHING OF THE EYES BY SEPARATING THE EYELIDS WITH
FINGERS. GET IMMEDIATE MEDICAL ATTENTION.
SKIN CONTACT:
IMMEDIATELY WASH SKIN WITH PLENTY OF SOAP AND WATER FOR 15 TO 20 MINUTES,
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. GET MEDICAL ATTENTION IF
IRRITATION DEVELOPS OR PERSISTS.
INHALATION:
IF INHALED, REMOVE TO FRESH AIR. IF NOT BREATHING, GIVE ARTIFICIAL
RESPIRATION OR GIVE OXYGEN BY TRAINED PERSONNEL. SEEK IMMEDIATE MEDICAL
ATTENTION.
INGESTION:
IF SWALLOWED, DO NOT INDUCE VOMITING. CALL A PHYSICIAN OR POISON CONTROL
CENTER IMMEDIATELY. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
| SECTION 5: FIRE FIGHTING MEASURES | |
SUITABLE AND UNSUITABLE EXTINGUISHING MEDIA:
SUITABLE EXTINGUISHING MEDIA:
USE CARBON DIOXIDE (CO2) OR DRY CHEMICAL WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
UNSUITABLE EXTINGUISHING MEDIA: WATER OR FOAM MAY CAUSE FROTHING.
SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS:
PROTECTIVE EQUIPMENT:
AS IN ANY FIRE, WEAR SELF-CONTAINED BREATHING APPARATUS (SCBA), MSHA/NIOSH
(APPROVED OR EQUIVALENT) AND FULL PROTECTIVE GEAR.
FIRE FIGHTING INSTRUCTIONS:
EVACUATE AREA OF UNPROTECTED PERSONNEL. USE COLD WATER SPRAY TO COOL FIRE
EXPOSED CONTAINERS TO MINIMIZE RISK OF RUPTURE. DO NOT ENTER CONFINED FIRE
SPACE WITHOUT FULL PROTECTIVE GEAR. IF POSSIBLE, CONTAIN FIRE RUN-OFF
WATER.
| SECTION 6: ACCIDENTAL RELEASE MEASURES | |
PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES:
PERSONAL PRECAUTIONS:
EVACUATE AREA AND KEEP UNNECESSARY AND UNPROTECTED PERSONNEL FROM ENTERING
THE SPILL AREA.
ENVIRONMENTAL PRECAUTIONS:
ENVIRONMENTAL PRECAUTIONS:
AVOID RUNOFF INTO STORM SEWERS, DITCHES, AND WATERWAYS.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP:
SPILL CLEANUP MEASURES:
ABSORB SPILL WITH INERT MATERIAL (E,G., DRY SAND OR EARTH), THEN PLACE IN A
CHEMICAL WASTE CONTAINER. PROVIDE VENTILATION. CLEAN UP SPILLS IMMEDIATELY
OBSERVING PRECAUTIONS IN THE PROTECTIVE EQUIPMENT SECTION. AFTER REMOVAL,
FLUSH SPILL AREA WITH SOAP AND WATER TO REMOVE TRACE RESIDUE. AVOID
PERSONAL CONTACT AND BREATHING VAPORS OR MISTS. VENTILATE AREA. USE PROPER
PERSONAL PROTECTIVE EQUIPMENT AS LISTED IN SECTION 8.
REFERENCE TO OTHER SECTIONS:
OTHER PRECAUTIONS: PUMP OR SHOVEL TO STORAGE/SALVAGE VESSELS.
| SECTION 7: HANDLING AND STORAGE | |
PRECAUTIONS FOR SAFE HANDLING:
HANDLING:
USE WITH ADEQUATE VENTILATION. AVOID BREATHING VAPOR, AEROSOL OR MIST.
HYGIENE PRACTICES: WASH THOROUGHLY AFTER HANDLING.
SPECIAL HANDLING PROCEDURES:
PROVIDE APPROPRIATE VENTILATION/RESPIRATORY PROTECTION AGAINST
DECOMPOSITION PRODUCTS (SEE SECTION 10) DURING WELDING/FLAME CUTTING
OPERATIONS AND TO PROTECT AGAINST DUST DURING SANDING/GRINDING OF CURED
PRODUCT.
CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES:
STORAGE:
STORE IN A COOL, DRY, WELL VENTILATED AREA AWAY FROM SOURCES OF HEAT AND
INCOMPATIBLE MATERIALS. KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE. DO
NOT STORE IN REACTIVE METAL CONTAINERS. KEEP AWAY FROM ACIDS, OXIDIZERS.
| SECTION 8: EXPOSURE CONTROLS, PERSONAL PROTECTION | |
EXPOSURE GUIDELINES:
CARBON BLACK:
GUIDELINE ACGIH: 3.5 MG/M3
TLV-TWA: 3.5 MG/M3
APPROPRIATE ENGINEERING CONTROLS:
ENGINEERING CONTROLS:
USE APPROPRIATE ENGINEERING CONTROL SUCH AS PROCESS ENCLOSURES, LOCAL
EXHAUST VENTILATION, OR OTHER ENGINEERING CONTROLS TO CONTROL AIRBORNE
LEVELS BELOW RECOMMENDED EXPOSURE LIMITS. GOOD GENERAL VENTILATION SHOULD
BE SUFFICIENT TO CONTROL AIRBORNE LEVELS. WHERE SUCH SYSTEMS ARE NOT
EFFECTIVE WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT, WHICH PERFORMS
SATISFACTORILY AND MEETS OSHA OR OTHER RECOGNIZED STANDARDS. CONSULT WITH
LOCAL PROCEDURES FOR SELECTION, TRAINING, INSPECTION AND MAINTENANCE OF THE
PERSONAL PROTECTIVE EQUIPMENT.
INDIVIDUAL PROTECTION MEASURES:
EYE/FACE PROTECTION:
WEAR APPROPRIATE PROTECTIVE GLASSES OR SPLASH GOGGLES AS DESCRIBED BY 29
CFR 1910.133, OSHA EYE AND FACE PROTECTION REGULATION, OR THE EUROPEAN
STANDARD EN 166.
SKIN PROTECTION DESCRIPTION:
WEAR APPROPRIATE PROTECTIVE GLOVES AND OTHER PROTECTIVE APPAREL TO PREVENT
SKIN CONTACT. CONSULT MANUFACTURER'S DATA FOR PERMEABILITY DATA.
RESPIRATORY PROTECTION:
A NIOSH APPROVED AIR-PURIFYING RESPIRATOR WITH AN ORGANIC VAPOR CARTRIDGE
OR CANISTER MAY BE PERMISSIBLE UNDER CERTAIN CIRCUMSTANCES WHERE AIRBORNE
CONCENTRATIONS ARE EXPECTED TO EXCEED EXPOSURE LIMITS. PROTECTION PROVIDED
BY AIR PURIFYING RESPIRATORS IS LIMITED. USE A POSITIVE PRESSURE AIR
SUPPLIED RESPIRATOR IF THERE IS ANY POTENTIAL FOR AN UNCONTROLLED RELEASE,
EXPOSURE LEVELS ARE NOT KNOWN, OR ANY OTHER CIRCUMSTANCES WHERE AIR
PURIFYING RESPIRATORS MAY NOT PROVIDE ADEQUATE PROTECTION.
OTHER PROTECTIVE:
FACILITIES STORING OR UTILIZING THIS MATERIAL SHOULD BE EQUIPPED WITH AN
EYEWASH AND A DELUGE SHOWER SAFETY STATION.
NOTES: ONLY ESTABLISHED PEL AND TLV VALUES FOR THE INGREDIENTS ARE LISTED.
| SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES | |
PHYSICAL AND CHEMICAL PROPERTIES:
PHYSICAL STATE APPEARANCE: LIQUID.
COLOR: MOBILE BLACK..
ODOR: MILD AMMONIA LIKE.
BOILING POINT: >450 DEG. F (232.2 DEG. C)
MELTING POINT: NOT DETERMINED.
SPECIFIC GRAVITY: 1.08
SOLUBILITY: NEGLIGIBLE.
VAPOR DENSITY: >1 (AIR = 1)
VAPOR PRESSURE: <1 MMHg @ 70 DEG. F
PERCENT VOLATILE: 0
EVAPORATION RATE: <<1 (BUTYL ACETATE = 1)
PH: 7-8 @ 5 PERCENT SOLUTION
MOLECULAR FORMULA: MIXTURE
MOLECULAR WEIGHT: MIXTURE
FLASH POINT: >275 DEG. F (135 DEG. C)
FLASH POINT METHOD: TAG CLOSED CUP. (TCC)
LOWER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
UPPER FLAMMABLE/EXPLOSIVE LIMIT: NOT DETERMINED.
AUTO IGNITION TEMPERATURE: NOT DETERMINED.
VOC CONTENT: 0 G/L
9.2. OTHER INFORMATION:
PERCENT SOLIDS BY WEIGHT: 100
| SECTION 10: STABILITY AND REACTIVITY | |
CHEMICAL STABILITY:
CHEMICAL STABILITY: STABLE UNDER NORMAL TEMPERATURES AND PRESSURES.
POSSIBILITY OF HAZARDOUS REACTIONS:
HAZARDOUS POLYMERIZATION: NOT REPORTED.
CONDITIONS TO AVOID:
CONDITIONS TO AVOID:
EXTREME HEAT, SPARKS, AND OPEN FLAME. INCOMPATIBLE MATERIALS, OXIDIZERS AND
OXIDIZING CONDITIONS.
INCOMPATIBLE MATERIALS:
INCOMPATIBLE MATERIALS:
OXIDIZERS, ACIDS, AND CHLORINATED ORGANIC COMPOUNDS. REACTIVE METALS (E.G.
SODIUM, CALCIUM, ZINC). SODIUM/CALCIUM HYPOCHLORITE. NITROUS ACID/ OXIDE,
NITRITES. PEROXIDES. MATERIALS REACTIVE WITH HYDROXYL COMPOUNDS.
| SECTION 11: TOXICOLOGICAL INFORMATION | |
TOXICOLOGICAL INFORMATION:
DIETHYLTOLUENEDIAMINE:
RTECS NUMBER: CZ1583125
INGESTION:
ORAL - RAT LD50:
472 MG/KG [SENSE ORGANS AND SPECIAL SENSES (EYE) - LACRIMATION
BEHAVIORAL - SOMNOLENCE (GENERAL DEPRESSED ACTIVITY) MUSCULOSKELETAL -
OTHER CHANGES]
EPOXIDIZED SOYBEAN OIL:
RTECS NUMBER: LL1100000
SKIN:
ADMINISTRATION ONTO THE SKIN - RABBIT LD50:
>20 ML/KG [DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL DOSE
VALUE]
ADMINISTRATION ONTO THE SKIN - RABBIT OPEN IRRITATION TEST: 500 MG [MILD]
INGESTION:
ORAL - RAT LD50:
22500 UL/KG [DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL DOSE
VALUE]
CARBON BLACK:
RTECS NUMBER: FF5800000
SKIN:
ADMINISTRATION ONTO THE SKIN - RABBIT:
>3 GM/KG [DETAILS OF TOXIC EFFECTS NOT REPORTED OTHER THAN LETHAL DOSE
VALUE]
ADMINISTRATION ONTO THE SKIN - RAT:
11 GM/KG/4W (INTERMITTENT) [BLOOD - PIGMENTED OR NUCLEATED RED BLOOD CELLS
LIVER - CHANGES IN LIVER WEIGHT NUTRITIONAL AND GROSS METABOLIC - WEIGHT
LOSS OR DECREASED WEIGHT GAIN]
INGESTION:
ORAL - RAT LD50:
>15400 MG/KG [BEHAVIORAL - SOMNOLENCE (GENERAL DEPRESSED ACTIVITY)]
CARCINOGENICITY:
IARC:
GROUP 2B: POSSIBLY CARCINOGENIC TO HUMANS.
| SECTION 12: ECOLOGICAL INFORMATION | |
ECO TOXICITY:
ECOTOXICITY: NO ECOTOXICITY DATA WAS FOUND FOR THE PRODUCT.
ENVIRONMENTAL FATE: NO ENVIRONMENTAL INFORMATION FOUND FOR THIS PRODUCT.
| SECTION 13: DISPOSAL CONSIDERATIONS | |
DESCRIPTION OF WASTE:
WASTE DISPOSAL:
CONSULT WITH THE US EPA GUIDELINES LISTED IN 40 CFR PART 261.3 FOR THE
CLASSIFICATIONS OF HAZARDOUS WASTE PRIOR TO DISPOSAL. FURTHERMORE, CONSULT
WITH YOUR STATE AND LOCAL WASTE REQUIREMENTS OR GUIDELINES, IF APPLICABLE,
TO ENSURE COMPLIANCE. ARRANGE DISPOSAL IN ACCORDANCE TO THE EPA AND/OR
STATE AND LOCAL GUIDELINES.
RCRA NUMBER: NONE.
| SECTION 14: TRANSPORT INFORMATION | |
DOT SHIPPING NAME: REFER TO BILL OF LADING
DOT UN NUMBER: REFER TO BILL OF LADING
IATA SHIPPING NAME: REFER TO BILL OF LADING
IATA UN NUMBER: REFER TO BILL OF LADING
IMDG UN NUMBER: REFER TO BILL OF LADING
IMDG SHIPPING NAME: REFER TO BILL OF LADING
| SECTION 15: REGULATORY INFORMATION | |
SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS SPECIFIC FOR THE PRODUCT:
DIPROPYLENE GLYCOL DIBENZOATE:
TSCA INVENTORY STATUS: LISTED
CANADA DSL: LISTED
DIETHYLTOLUENEDIAMINE:
TSCA INVENTORY STATUS: LISTED
CANADA DSL: LISTED
EPOXIDIZED SOYBEAN OIL:
TSCA INVENTORY STATUS: LISTED
CANADA DSL: LISTED
CARBON BLACK:
TSCA INVENTORY STATUS: LISTED
CALIFORNIA PROP 65:
LISTED: CANCER.
MASSACHUSETTS: LISTED
PENNSYLVANIA: LISTED
CANADA DSL: LISTED
CANADIAN REGULATIONS:
WHMIS HAZARD CLASS(ES): D2B, D2A
ALL COMPONENTS OF THIS PRODUCT ARE ON THE CANADIAN DOMESTIC SUBSTANCES
LIST.
WHMIS PICTOGRAMS: D2 - MATERIALS CAUSING OTHER TOXIC EFFECTS
| SECTION 16: ADDITIONAL INFORMATION | |
HMIS RATINGS:
HMIS HEALTH HAZARD 2*
HMIS FIRE HAZARD 1
HMIS REACTIVITY 0
HMIS PERSONAL PROTECTION X
HEALTH HAZARD 2*
FIRE HAZARD 1
REACTIVITY 0
PERSONAL PROTECTION X
* CHRONIC HEALTH EFFECTS
SDS REVISION DATE: JANUARY 27, 2017
SDS REVISION NOTES: GHS UPDATE
SDS FORMAT: IN ACCORDANCE TO OSHA GHS 1910.1200
SDS AUTHOR: ACTIO CORPORATION
DISCLAIMER:
THE INFORMATION IN THIS SAFETY DATA SHEET (SDS) IS BELIEVED TO BE CORRECT
AS OF THE DATE ISSUED. ITW POLYMERS ADHESIVES, NA, MAKES NO WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. USER IS RESPONSIBLE FOR DETERMINING WHETHER
THE ITW POLYMERS ADHESIVES, NA PRODUCT IS FIT FOR A PARTICULAR PURPOSE AND
SUITABLE FOR USER'S METHOD OF USE OR APPLICATION. GIVEN THE VARIETY OF
FACTORS THAT CAN AFFECT THE USE AND APPLICATION OF A ITW POLYMERS
ADHESIVES, NA PRODUCT, SOME OF WHICH ARE UNIQUELY WITHIN THE USER'S
KNOWLEDGE AND CONTROL, IT IS ESSENTIAL THAT THE USER EVALUATE THE ITW
POLYMERS ADHESIVES, NA PRODUCT TO DETERMINE WHETHER IT IS FIT FOR A
PARTICULAR PURPOSE AND SUITABLE FOR USER'S METHOD OF USE OR APPLICATION.
ITW POLYMERS ADHESIVES, NA PROVIDES INFORMATION IN ELECTRONIC FORM AS A
SERVICE TO ITS CUSTOMERS. DUE TO THE REMOTE POSSIBILITY THAT ELECTRONIC
TRANSFER MAY HAVE RESULTED IN ERRORS, OMISSIONS OR ALTERATIONS IN THIS
INFORMATION, ITW POLYMERS ADHESIVES, NA MAKES NO REPRESENTATIONS AS TO ITS
COMPLETENESS OR ACCURACY. IN ADDITION, INFORMATION OBTAINED FROM A DATABASE
MAY NOT BE AS CURRENT AS THE INFORMATION IN THE MSDS AVAILABLE DIRECTLY
FROM ITW POLYMERS ADHESIVES, NA
COPYRIGHT(C) 1996-2015 ACTIO CORPORATION. ALL RIGHTS RESERVED.
REVISION: 10/20/2015